Connect Fixtures
Connect Fixtures
Connect fixtures by splicing their lead wires to your main runs. The most common method is to use twist-on style connectors. These connections are made by stripping the last half-inch of wire at each end, then twisting them together in a clockwise direction. Then insert the connection into the cap and twist clockwise until the wire begins to spin with the cap. Another option is to use clamp connect junctions. To use these, simply invert the stripped wire ends into the terminal, push down the lever and close the housing. This protects the connection from moisture and corrosion. If you have a cluster of fixtures, you may want to use a hub (pictured here). Hubs allow you to easily connect multiple fixtures in a single location. Hubs can either be stake-mounted above the ground or buried underground.
Test System
Once all of your connections are made, you can test your system. Turn on your transformer and then walk around your property to ensure that every fixture is lit. If one is out, it may be that you have a bad connection to your system.
